PSpiceのModel Editorを使用しました。
Input
trr=2n
If=IR=0.01
RL=50
Output
TT=2.885390081778e-009
Netlist
*BeginSpec*IF:*JC:*RL:*RB: Vz=0 Iz=0 Zz=0*RR: Trr=2.0000E-9 Ifwd=10.000E-3 Irev=10.000E-3 Rl=50*EndSpec
*BeginTrace*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)*JC: 0,1,.1,10,1,3,0,0,-1 (27)*RL: 0,0,1,100,1,3,0,0,-1 (27)*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)*EndTrace
*BeginParam*IS=10.000E-15 (10.000E-21,.1,0)*N=1 (.2,5,0)*RS=1.0000E-3 (1.0000E-6,100,0)*IKF=0 (0,1.0000E3,0)*XTI=3 (-100,100,0)*EG=1.1100 (.1,5.5100,0)*CJO=1.0000E-12 (10.000E-21,1.0000E-3,0)*M=.3333 (.1,10,0)*VJ=.75 (.3905,10,0)*FC=.5 (1.0000E-3,10,0)*ISR=100.00E-12 (10.000E-21,.1,0)*NR=2 (.5,5,0)*BV=100 (.1,1.0000E6,0)*IBV=100.00E-6 (1.0000E-9,10,0)*TT=2.8854E-9 (100.00E-18,1.0000E-3,0)*EndParam
*DEVICE=Test,D
* Test D model* created using Model Editor release 16.0.0 on 08/17/09 at 16:40* The Model Editor is a PSpice product..MODEL Test D+ RS=1.0000E-3+ CJO=1.0000E-12+ M=.3333+ VJ=.75+ ISR=100.00E-12+ BV=100+ IBV=100.00E-6+ TT=2.8854E-9
